EasyPIC 6 Development System, TMIK003, Microchip

Description

EasyPIC 6 Development System, TMIK003, Microchip The MikroElektronika EasyPIC 6 is an outstanding development tool for programming and experimenting with PIC® microcontrollers. It supports over 160 different MCUs from the PIC10, PIC12, PIC16, and PIC18 families, with DIP packaging ranging from 8 to 40 pins. The board comes with a pre-installed PIC16F887. An impressive variety of peripherals and expansion connectors are built directly onto the board, including LCD/GLCD displays and a temperature sensor. - RS-232 communication with a PC or microcontroller is performed via a DB9 connector. - The system supports MCUs with DIP8, DIP14, DIP18, DIP20, DIP28, and DIP40 pinouts. - A 2x16-character COG display is used to show text messages. It connects to the system via SPI. - 36 buttons are used to stimulate the microcontroller's digital inputs. They are connected to all microcontroller pins. - A very fast USB 2.0 programmer with mikroICD support is included. An external MPLAB programmer can also be connected. - The USB communication connector allows you to connect your microcontroller to a PC via a USB interface. - All microcontroller pins are connected to IDC10 connectors for future expansion. - Integrated jumpers are used to configure pull-up / pull-down port settings. These jumpers are available for all pins. - The PS2 connector enables direct connection of the development system to a PS/2 device, such as a keyboard or mouse. - The voltage level applied when a button is pressed (GND or +5V) is selected via an integrated jumper. - 36 LEDs (light-emitting diodes) indicate the logical states of all microcontroller pins. - An optional LCD and digital thermometer can be easily connected via the built-in connectors. - An optional 128x64 graphical LCD with touch panel can be easily connected to the board via the appropriate connector. - A potentiometer is used to test A/D conversions. Inputs can be configured via jumpers. - The menu keypad enables easy and quick navigation through your prototype device's menu. - The quartz crystal is replaceable. MCU pins can be configured via jumpers either as oscillator inputs or as regular I/O pins. - USB or external power supply is selected by moving a jumper. The power switch turns the system on/off. - A DIP switch is used to isolate port pins from pull-up / pull-down resistors. - The port expander allows you to add more inputs or outputs to your prototype device. - A 4x4 keypad enables efficient numeric data entry as well as other characters. - The reset circuit is used to reset the microcontroller. It connects to the microcontroller's MCLR pin. - The LCD contrast potentiometer is used to adjust the LCD contrast. - Programming in mikroC, mikroBasic, or mikroPascal. Included: - EasyPIC6 development board - GLCD (Touch Screen, serial cable, and stylus) - USB cable - CD containing software, drivers, and examples in C, BASIC, and Pascal. - Printed documentation: - EasyPIC6 Manual - EasyPIC6 Schematic Diagram - PICFlash with mikroICD Manual - mikroICD Manual - Quick Guide for Installing USB Drivers Equipment in "New" condition, used only 2 or 3 times as a PIC programming interface. Original box, manuals, cables, etc. included. Extras included: 1x Breadboard RH-21, K&H Products 4x Solar Panel 1x EasyPROTO 1x PROTO Connect with connector 1x MMC/SD Card board PROTO 3x 40-Pin ZIF Socket 3x PIC16F877A 2x PIC16F877 1x PIC16F887 3x PIC16F84A Equipment in "New" condition, never used. Price: 205,00€ Accepted payment methods: - Cash (upon hand delivery) - MB Way - Bank transfer Delivery: - OLX pickup / shipping via CTT (shipping fees apply) - Hand delivery in Esmoriz / other locations to be agreed